@article {Foroughi2008, title = {Localization of pelvic anatomical coordinate system using US/atlas registration for total hip replacement}, journal = {Medical image computing and computer-assisted intervention (MICCAI)}, volume = {11}, number = {Pt 2}, year = {2008}, pages = {871{\textendash}879}, publisher = {Johns Hopkins University, Baltimore, MD, USA pezhman@cs jhu edu}, abstract = {

In Total Hip Replacement (THR) procedures, misalignment of the acetabular component can lead to dislocation, impingement For the successful alignment of acetabular component, precise estimation of pelvic anatomical coordinate system is necessary Conventional navigation systems use CT scan or fluoroscopy, or involve implanted bone fiducials or invasive probing of bony landmarks to locate the anatomical coordinate In this paper, an ultrasound-based approach is proposed that exploits prior knowledge about the anatomy of the pelvis in the form of a 3D surface atlas Tracked ultrasound images are utilized to extract sample points from the surface of the pelvis A generic coordinate system in the specific patient is localized by registering these points to a statistical atlas of the pelvis in which a canonical anatomical coordinate system had been defined This technique has been evaluated using simulation, dry bone, and cadaver experiments, was able to localize the anatomical coordinate system with the accuracy of about 1 degree

}, keywords = {Algorithms, Arthroplasty, Automated, Computer-Assisted, Hip, Hip Joint, Humans, Image Enhancement, Image Interpretation, Imaging, methods, Pattern Recognition, Pelvic Bones, Replacement, Reproducibility of Results, Sensitivity, Specificity, Subtraction Technique, Surgery, surgery/ultrasonography, Three-Dimensional, Ultrasonography}, author = {Pezhman Foroughi and Danny Y Song and Gouthami Chintalapani and Russell H. Taylor and Gabor Fichtinger} } @article {DiMaio2007b, title = {Challenges in image-guided therapy system design}, journal = {Neuroimage}, volume = {37 Suppl 1}, year = {2007}, pages = {S144{\textendash}S151}, publisher = {Brigham, Women{\textquoteright}s Hospital, 75 Francis St , Boston, MA 02115, USA simond@bwh harvard edu}, abstract = {

System development for image-guided therapy (IGT), or image-guided interventions (IGI), continues to be an area of active interest across academic, industry groups This is an emerging field that is growing rapidly: major academic institutions, medical device manufacturers have produced IGT technologies that are in routine clinical use, dozens of high-impact publications are published in well regarded journals each year, and several small companies have successfully commercialized sophisticated IGT systems In meetings between IGT investigators over the last two years, a consensus has emerged that several key areas must be addressed collaboratively by the community to reach the next level of impact, efficiency in IGT research, development to improve patient care These meetings culminated in a two-day workshop that brought together several academic, industrial leaders in the field today The goals of the workshop were to identify gaps in the engineering infrastructure available to IGT researchers, develop the role of research funding agencies, the recently established US-based National Center for Image Guided Therapy (NCIGT), and ultimately to facilitate the transfer of technology among research centers that are sponsored by the National Institutes of Health (NIH) Workshop discussions spanned many of the current challenges in the development, deployment of new IGT systems Key challenges were identified in a number of areas, including: validation standards; workflows, use-cases, and application requirements; component reusability;, device interface standards This report elaborates on these key points, proposes research challenges that are to be addressed by a joint effort between academic, industry, and NIH participants

}, keywords = {adverse effects/instrumentation/trends, Algorithms, Computational Biology, Computer Systems, Computer-Assisted, Humans, instrumentation/trends, Knowledge Bases, Models, National Institutes of Health (U S ), Neurosurgical Procedures, Organizational, Outcome Assessment (Health Care), Reproducibility of Results, Robotics, Software, Surgery, Treatment Outcome, United States}, doi = {10 1016/j neuroimage 2007 04 026}, url = {http://dx doi org/10 1016/j neuroimage 2007 04 026}, author = {Simon DiMaio and Tina Kapur and Kevin Cleary and Stephen Aylward and Peter Kazanzides and Kirby Vosburgh and Randy Ellis and James Duncan and Keyvan Farahani and Heinz Lemke and T. M. Peters and William Bill Lorensen and David Gobbi and John Haller and Laurence Larry Clarke and Stephen Pizer and Russell H. Taylor and Robert L. Galloway, Jr. and Gabor Fichtinger and Nobuhiko Hata and Kimberly Lawson and Clare M Tempany and Ron Kikinis and Ferenc Jolesz} } @article {Xu2006a, title = {Lung deformation estimation and four-dimensional CT lung reconstruction}, journal = {Journal of Academic Radiology}, volume = {13}, number = {9}, year = {2006}, month = {Sep}, pages = {1082{\textendash}1092}, publisher = {Philips Research North America, 345 Scarborough Road, Briarcliff Manor, NY 10510, USA sheng xu@philips com}, abstract = {

RATIONALE AND OBJECTIVES: Four-dimensional (4D) computed tomography (CT) can be used in radiation treatment planning to account for respiratory motion Current 4D CT techniques have limitations in either spatial or temporal resolution In addition, most of these techniques rely on auxiliary surrogates to relate the time of the CT scan to the patient{\textquoteright}s respiratory phase We propose a 4D CT method for lung applications to overcome these problems MATERIALS AND METHODS: A set of axial scans are taken at multiple table positions to obtain a series of two-dimensional images while the patient is breathing freely Each two-dimensional image is registered to a reference CT volume The deformation of the image with respect to the volume is used to synchronize the image with the respiratory cycle assuming that there is no phase variation along the craniocaudal direction The reconstructed 4D dataset is a series of deformable transformations of the reference volume RESULTS: A synthetic 4D dataset showed that the registration error is less than 5\% of the image deformation A swine study showed that the algorithm can generate better image quality than the image sorting method A respiratory-gated 4D dataset showed that the algorithm{\textquoteright}s result is consistent with the ground truth CONCLUSION: The algorithm can reconstruct good quality 4D images without external surrogates even if the CT scans are acquired under irregular respiratory motion The algorithm may allow for reduced radiation dose to the patient with a limited loss of image quality Although the phase variation exists along the craniocaudal direction, the 4D reconstruction is reasonably accurate

}, keywords = {Algorithms, Artifacts, Computer-Assisted, Humans, Imaging, Information Storage, Lung, methods, Movement, Phantoms, Radiographic Image Enhancement, Radiographic Image Interpretation, Radiography, Reproducibility of Results, Respiratory Mechanics, Retrieval, Sensitivity, Specificity, Three-Dimensional, Tomography, X-Ray Computed}, doi = {10 1016/j acra 2006 05 004}, url = {http://dx doi org/10 1016/j acra 2006 05 004}, author = {Sheng Xu and Russell H. Taylor and Gabor Fichtinger and Kevin Cleary} } @article {Boctor2006b, title = {Ultrasound monitoring of tissue ablation via deformation model and shape priors}, journal = {Medical image computing and computer-assisted intervention (MICCAI)}, volume = {9}, number = {Pt 2}, year = {2006}, pages = {405{\textendash}412}, abstract = {

A rapid approach to monitor ablative therapy through optimizing shape, elasticity parameters is introduced Our motivating clinical application is targeting, intraoperative monitoring of hepatic tumor thermal ablation, but the method translates to the generic problem of encapsulated stiff masses (solid organs, tumors, ablated lesions, etc ) in ultrasound imaging The approach involves the integration of the following components: a biomechanical computational model of the tissue, a correlation approach to estimate/track tissue deformation, and an optimization method to solve the inverse problem, recover the shape parameters in the volume of interest Successful convergence, reliability studies were conducted on simulated data Then ex-vivo studies were performed on 18 ex-vivo bovine liver samples previously ablated under ultrasound monitoring in controlled laboratory environment While B-mode ultrasound does not clearly identify the development of necrotic lesions, the proposed technique can potentially segment the ablation zone The same framework can also yield both partial, full elasticity reconstruction

}, keywords = {Algorithms, Animals, Automated, Biological, Cattle, Computer-Assisted, Elasticity, Hepatectomy, Image Enhancement, Image Interpretation, Imaging, Interventional, Liver, Mechanical, methods, Models, Pattern Recognition, physiology/surgery/ultrasonography, Reproducibility of Results, Sensitivity, Specificity, Statistical, Stress, Subtraction Technique, Surgery, Three-Dimensional, Ultrasonography}, author = {Emad Boctor and Michelle de Oliveira and Michael Choti and Roger Ghanem and Russell H. Taylor and Gregory D. Hager and Gabor Fichtinger} } @article {Xu2005b, title = {Lung deformation estimation and four-dimensional CT lung reconstruction}, journal = {Medical image computing and computer-assisted intervention (MICCAI)}, volume = {8}, number = {Pt 2}, year = {2005}, pages = {312{\textendash}319}, abstract = {

Four-dimensional (4D) computed tomography (CT) image acquisition is a useful technique in radiation treatment planning, interventional radiology in that it can account for respiratory motion of lungs Current 4D lung reconstruction techniques have limitations in either spatial or temporal resolution In addition, most of these techniques rely on auxiliary surrogates to relate the time of CT scan to the patient{\textquoteright}s respiratory phase In this paper, we propose a novel 4D CT lung reconstruction, deformation estimation algorithm Our algorithm is purely image based The algorithm can reconstruct high quality 4D images even if the original images are acquired under irregular respiratory motion The algorithm is validated using synthetic 4D lung data Experimental results from a swine study data are also presented

}, keywords = {Algorithms, Animals, Artificial Intelligence, Biological, Computer Simulation, Computer-Assisted, Elasticity, Humans, Imaging, Lung, methods, Models, physiology/radiography, Radiographic Image Enhancement, Radiographic Image Interpretation, Reproducibility of Results, Respiratory Mechanics, Sensitivity, Specificity, Swine, Three-Dimensional, Tomography, X-Ray Computed}, author = {Sheng Xu and Russell H. Taylor and Gabor Fichtinger and Kevin Cleary} }